I expect I'll feel a bit foolish when the obvious answer is provided,
but I have to ask:

Would someone please advise me as to how to set the date on my 2008
Escape Hybrid? The car has the factory nav package and audio package.
The date is displayed on the indicator at the top of the dash along with
outside temp, selected inside temps and clock.

Perhaps the answer is staring right at me but I don't see it.

Thanks in advance!

Ken

i don't have one, so this answer is not meant to be demeaning, or foolish.

but if i am not mistaken, the how to do it's and programming info is still
put in the owners manual.
"KWS" <noaccount@nospam.com> wrote in message
news:a5adncFQOMtvKvDVnZ2dnUVZ_hjinZ2d@comcast.com. ..
>I expect I'll feel a bit foolish when the obvious answer is provided, but I
>have to ask:
>
> Would someone please advise me as to how to set the date on my 2008 Escape
> Hybrid? The car has the factory nav package and audio package. The date is
> displayed on the indicator at the top of the dash along with outside temp,
> selected inside temps and clock.
>
> Perhaps the answer is staring right at me but I don't see it.
>
> Thanks in advance!
>
> Ken

That's why I feel like an idiot. I looked there first. No go. I probably
should have stated that up front.

Ken


Tom wrote:
> i don't have one, so this answer is not meant to be demeaning, or foolish.
>
> but if i am not mistaken, the how to do it's and programming info is still
> put in the owners manual.
> "KWS" <noaccount@nospam.com> wrote in message
> news:a5adncFQOMtvKvDVnZ2dnUVZ_hjinZ2d@comcast.com. ..
>> I expect I'll feel a bit foolish when the obvious answer is provided, but I
>> have to ask:
>>
>> Would someone please advise me as to how to set the date on my 2008 Escape
>> Hybrid? The car has the factory nav package and audio package. The date is
>> displayed on the indicator at the top of the dash along with outside temp,
>> selected inside temps and clock.
>>
>> Perhaps the answer is staring right at me but I don't see it.
>>
>> Thanks in advance!
>>
>> Ken
>
>

CLOCK: To set the time, press CLOCK. The display will read SET

TIME. Use the memory preset #s to enter in the desired time, hours and
minutes. The clock will then begin

from that time.

This is according to the owners manual page 26. Check here for an online
one:
http://www.motorcraftservice.com/pub.../08hevog2e.pdf

SC Tom



"KWS" <noaccount@nospam.com> wrote in message
news:_4ednVCJ_N6DxPPVnZ2dnUVZ_s_inZ2d@comcast.com. ..
> That's why I feel like an idiot. I looked there first. No go. I probably
> should have stated that up front.
>
> Ken
>
>
> Tom wrote:
>> i don't have one, so this answer is not meant to be demeaning, or
>> foolish.
>>
>> but if i am not mistaken, the how to do it's and programming info is
>> still put in the owners manual.
>> "KWS" <noaccount@nospam.com> wrote in message
>> news:a5adncFQOMtvKvDVnZ2dnUVZ_hjinZ2d@comcast.com. ..
>>> I expect I'll feel a bit foolish when the obvious answer is provided,
>>> but I have to ask:
>>>
>>> Would someone please advise me as to how to set the date on my 2008
>>> Escape Hybrid? The car has the factory nav package and audio package.
>>> The date is displayed on the indicator at the top of the dash along with
>>> outside temp, selected inside temps and clock.
>>>
>>> Perhaps the answer is staring right at me but I don't see it.
>>>
>>> Thanks in advance!
>>>
>>> Ken
>>

Thanks, Tom

I partially solved the problem. The date was showing July 4th yesterday
because the am/pm selection was wrong. With that fixed, the correct date
is shown. So the immediate problem is fixed.

There is still the issue of how the DATE is set. It is now a matter of
curiosity more than anything else. How do you do it?

I appreciate you directing me to the motocraftservice site. I'll
bookmark that; thanks. The info you provided does address the clock,
but not the date.

When we bought the car, I also bought the shop manuals. So far, I can't
find anything there also. Very strange, indeed.

Regards,

Ken

SC Tom wrote:
> CLOCK: To set the time, press CLOCK. The display will read SET
>
> TIME. Use the memory preset #s to enter in the desired time, hours and
> minutes. The clock will then begin
>
> from that time.
>
> This is according to the owners manual page 26. Check here for an online
> one:
> http://www.motorcraftservice.com/pub.../08hevog2e.pdf
>
>
> SC Tom
>
>
>
> "KWS" <noaccount@nospam.com> wrote in message
> news:_4ednVCJ_N6DxPPVnZ2dnUVZ_s_inZ2d@comcast.com. ..
>> That's why I feel like an idiot. I looked there first. No go. I
>> probably should have stated that up front.
>>
>> Ken
>>
>>
>> Tom wrote:
>>> i don't have one, so this answer is not meant to be demeaning, or
>>> foolish.
>>>
>>> but if i am not mistaken, the how to do it's and programming info is
>>> still put in the owners manual.
>>> "KWS" <noaccount@nospam.com> wrote in message
>>> news:a5adncFQOMtvKvDVnZ2dnUVZ_hjinZ2d@comcast.com. ..
>>>> I expect I'll feel a bit foolish when the obvious answer is
>>>> provided, but I have to ask:
>>>>
>>>> Would someone please advise me as to how to set the date on my 2008
>>>> Escape Hybrid? The car has the factory nav package and audio
>>>> package. The date is displayed on the indicator at the top of the
>>>> dash along with outside temp, selected inside temps and clock.
>>>>
>>>> Perhaps the answer is staring right at me but I don't see it.
>>>>
>>>> Thanks in advance!
>>>>
>>>> Ken
>>>

According to the owners manual, there is a Navigation Supplement for that
system.
Seems a shame that so much stuff is added on to cars that a single owners
manual won't cover it all. Nice accessories I guess, but I mostly think of
it as more stuff to break. The manual on my '02 Escape is thicker than any
of the one's I've had on any car, and I've owned numerous vehicles since
1963. Bigger and better toys for everyone LOL.

SC Tom


"KWS" <noaccount@nospam.com> wrote in message
news:nqWdncbvvJUL9vPVnZ2dnUVZ_tLinZ2d@comcast.com. ..
> Thanks, Tom
>
> I partially solved the problem. The date was showing July 4th yesterday
> because the am/pm selection was wrong. With that fixed, the correct date
> is shown. So the immediate problem is fixed.
>
> There is still the issue of how the DATE is set. It is now a matter of
> curiosity more than anything else. How do you do it?
>
> I appreciate you directing me to the motocraftservice site. I'll bookmark
> that; thanks. The info you provided does address the clock, but not the
> date.
>
> When we bought the car, I also bought the shop manuals. So far, I can't
> find anything there also. Very strange, indeed.
>
> Regards,
>
> Ken
>
> SC Tom wrote:
>> CLOCK: To set the time, press CLOCK. The display will read SET
>>
>> TIME. Use the memory preset #s to enter in the desired time, hours and
>> minutes. The clock will then begin
>>
>> from that time.
>>
>> This is according to the owners manual page 26. Check here for an online
>> one:
>> http://www.motorcraftservice.com/pub.../08hevog2e.pdf
>> SC Tom
>>
>>
>>
>> "KWS" <noaccount@nospam.com> wrote in message
>> news:_4ednVCJ_N6DxPPVnZ2dnUVZ_s_inZ2d@comcast.com. ..
>>> That's why I feel like an idiot. I looked there first. No go. I probably
>>> should have stated that up front.
>>>
>>> Ken
>>>
>>>
>>> Tom wrote:
>>>> i don't have one, so this answer is not meant to be demeaning, or
>>>> foolish.
>>>>
>>>> but if i am not mistaken, the how to do it's and programming info is
>>>> still put in the owners manual.
>>>> "KWS" <noaccount@nospam.com> wrote in message
>>>> news:a5adncFQOMtvKvDVnZ2dnUVZ_hjinZ2d@comcast.com. ..
>>>>> I expect I'll feel a bit foolish when the obvious answer is provided,
>>>>> but I have to ask:
>>>>>
>>>>> Would someone please advise me as to how to set the date on my 2008
>>>>> Escape Hybrid? The car has the factory nav package and audio package.
>>>>> The date is displayed on the indicator at the top of the dash along
>>>>> with outside temp, selected inside temps and clock.
>>>>>
>>>>> Perhaps the answer is staring right at me but I don't see it.
>>>>>
>>>>> Thanks in advance!
>>>>>
>>>>> Ken
>>>>