I am having trouble getting my codes scaned on my 97 taurus. The scan tools
won't connect.
what pins are realy needed on the connector?
data buss:

on pin 2 0v
on pin 10 5V

is the data buss differential or single sided?
Should pin 2 be 0V?

pin 4,5,6 13, 0v (gnd)

pin 7 12 volts? (whats this pin for?)

pin 16 12 volts.

bob

i thought that year has obd1 connection.

----------------------------------------------------------------
http://www.minibite.com/america/malone.htm

On Oct 1, 6:43 pm, ds...@webtv.net wrote:
> i thought that year has obd1 connection.


A very few late '95 cars had obdII and just about all of them had it
in '96.

On Wed, 1 Oct 2008 18:43:41 -0400, ds549@webtv.net wrote:

> i thought that year has obd1 connection.
>
>----------------------------------------------------------------
>http://www.minibite.com/america/malone.htm
>
No, all 1996 and newer are OBD2 - and by law are within something like
8 inches of the steering column, under the dash and in the open (not
concealed
** Posted from http://www.teranews.com **