Does anyone know how to remove the window handle on a '95 chevy pickup.
I need to get the door paneling off so I can tighten the exterior
handle. It is falling off. Is there a horse-shoe clip that needs to be
removed? I could't really see too well.

Should be a C clip on the back of the handle.

There is a tool you can rent / buy to remove the clip.

You can also wrap a rag behind the handle and pull up & down on each end
of the rag to snag the clip off.


Good Luck


harryface

"Harry Face" <Harryface9105@webtv.net> wrote in message
news:12822-44F52936-817@storefull-3318.bay.webtv.net...
> Should be a C clip on the back of the handle.
>
> There is a tool you can rent / buy to remove the clip.
>
> You can also wrap a rag behind the handle and pull up & down on each end
> of the rag to snag the clip off.
>

Echo that. I have the tool, but before I got one I used a rag. Must have
removed a hundred door and window cranks this way.

--

-Mike-
mmarlowREMOVE@alltel.net

Ok. There is foam all around the shaft. I am going to have to cut that
away first, Thanks for the advice guys. I'm gonna try it now.

The foam is an airflowsheild / baffle, - easily replacable


h

ya, i fixed the outside handle, not the inside handle just broke. Now I
am going to have to break the door down again and see what is up with
that. It is time to trade my 95 in for a new chevy.