Electric in line fuel pump instalation

#1 (**permalink**) 10-10-2008, 05:33 PM

Hi
It is 1 Ton RAM 92 Turbo Diesel. What is the best place to connect electric
fuel pump - I mean electricity - need power only with ignition ON. I don't
like to take cables to fuse box. I any place close to Air Heating relays?

#2 (**permalink**) 10-10-2008, 08:33 PM

"pj" <pucellaremove@shaw.ca> wrote in message
news:MNKHk.10175$jX5.436@newsfe08.iad...
> Hi
> It is 1 Ton RAM 92 Turbo Diesel. What is the best place to connect
> electric fuel pump - I mean electricity - need power only with ignition
> ON. I don't like to take cables to fuse box. I any place close to Air
> Heating relays?
>

Each of the manifold heater relays on the drivers side fender panel have a
14 gauge dark blue wire that is hot with IGN only.
Each connector pushes onto a threaded stud (10-32) that easily accepts a
ring terminal and nut.

#3 (**permalink**) 10-10-2008, 08:33 PM

"John Kunkel" <nobody@nowhere.net> wrote in message
news:0padndc28eUwAnLVnZ2dnUVZ_tTinZ2d@comcast.com. ..
>
> "pj" <pucellaremove@shaw.ca> wrote in message
> news:MNKHk.10175$jX5.436@newsfe08.iad...
>> Hi
>> It is 1 Ton RAM 92 Turbo Diesel. What is the best place to connect
>> electric fuel pump - I mean electricity - need power only with ignition
>> ON. I don't like to take cables to fuse box. I any place close to Air
>> Heating relays?
>>
>
> Each of the manifold heater relays on the drivers side fender panel have a
> 14 gauge dark blue wire that is hot with IGN only.
> Each connector pushes onto a threaded stud (10-32) that easily accepts a
> ring terminal and nut.
>Thanks for info.
I will do it.
Best regards jp